Skip to content

Cir. Tech. 4/1975

Approved heat-treatment of suspension gears

Department
Technical
Year
1975
Collection
Regulation-wise digest (to 2017)
Under
CMR 81/MMR 89
In the DGMS Circulars (up to June 2017) compilation, p. 139.
Open PDF at page 139

12. Approved heat-treatment of suspension gears— The Indian Standard Wagon Co. Ltd., Burnpur, having necessary facilities and know-how for heat-treatment of 1.5% Manganese and other steels has been approved for heat-treatment of cage/skip suspension gears for winding and has been enlisted in this Directorate as an approved establishment for the purpose, While sending the gears for heat-treatment you are requested to furnish to the works full details of the steel, type of heat-treatment given earlier and now required and also whether the component is new or used.

One of the following heat-treatments is generally given to the cage suspension gears :

(1) Normalize— To refine the grain structure and to relieve the stresses.

(2) Normalize and temper—To refine the grain structure and to give required mechanical properties.

(3) Normalize, harden and temper—To refine the grain structure and to give the optimum mechanical properties.

(Cir. Tech. 4/1975)

Reproduced from the official DGMS circular compilations for public reference. The PDF is the authoritative text; DGMS may have amended or withdrawn older instructions since.

← Search all circulars