Skip to content

Cir. (Tech.) 9/1997

Accidents due to defective design of ore chutes

Department
Technical
Year
1997
Collection
Regulation-wise digest (to 2017)
Under
CMR 115 / MMR 118
In the DGMS Circulars (up to June 2017) compilation, pp. 294–295.
Open PDF at page 294

6. Accidents due to defective design of ore chutes—Accidents in belowground non-coal mines due to defect in the ore chute design and connected operations therewith have been noticed during the course of accident enquiries and subsequent analysis of accidents. The analysis has revealed that proper safety measures and effective design features had not been incorporated to prevent the dangers from the following—

(a) Sudden run down/rolling of muck from the stope or ore pocket into empty ore chutes,

(b) Improper design of the covering lips of the ore chutes to prevent any openings being left therein,

(c) Operator's safety in case of sudden run down/rolling of muck. In view of the above, it is recommended that :

• a buffer stock (muck) shall always be left over the chute to work as cushion and to guard against sudden run/roll down of debris;

• manual operation of ore chute/pocket with the help of wooden planks as covering of the opening shall be eliminated and replaced with mechanically (pneumatic or hydraulic) operated chutes.

• Safety of the chute operator or the persons passing underneath shall be ensured by providing suitable operators cabin or refuse chamber.

(Cir. Tech. Sapicom 3/1997

7. Identification for newly recruited inexperienced mine workers—A person newly recruited for employment in a mine does not possess any knowledge of mining activities and is therefore, exposed to dangers and hazards in the same. According to Reg. 115(9)

of the Coal Mines Regulations, 1957, and Reg. 118(10) of the Metalliferous Mines Regulations, 1961 an inexperienced person shall not be allowed to work alone without presence/ guidance of an experienced worker so as to ensure the safety of new worker.

• It is necessary that every new person is given initial training as per the Mines Vocational Training Rules, 1966 to develop necessary and requisite skill and safety awareness in him. The new worker should be aware of the various dangers involved in different types of operations. No inexperienced worker should be allowed to work in any particular job unless he has been trained thoroughly in safe work procedure related to that job.

• In view of the above, every newly recruited mine worker shall be issued a coloured helmet of a distinct colour, one different from those worn by experienced mine workers. He shall wear this distinctively coloured helmet all the time while at work in or around a mine for atleast one year from the date of initial employment. The coloured helmet should bear luminous markings/strips for ready identification while at work in the dark.

• By introducing the system, newly recruited mine workers can be easily and readily identified by these distinctively coloured helmets (preferably written N.E.W.—newly employed worker).

Competent persons and mine officials shall help to develop/inculcate safely consciousness and safety awareness in them from the very beginning of their employment. Mine officials shall take care of, watch and guide the new workers to discharge their duties safely.

Managements are requested to take appropriate action in the mater at the earliest and ensure that all newly recruited mine workers are issued with distinctively coloured helmets and to ensure that they wear them at all times.

[Cir. (Tech.) 9/1997]

Reproduced from the official DGMS circular compilations for public reference. The PDF is the authoritative text; DGMS may have amended or withdrawn older instructions since.

← Search all circulars